T-Slotted Tables

T-slotted tables are available for the entire line of SATEC Series static hydraulic testing machines, also known as 5590 series frames. These fixtures are also available for SATEC models known as the HV series of frames. 

The T-slot table provides an extremely versatile method of securing fixtures in the compression space of a frame. The table is bolted to the machine frame loading table and is typically manufactured to cover the full width and depth of the loading table. 

Depending on the frame model, the table will reduce the useable compression space 50 to 75 mm (2 to 3 in). The frame loading table must be drilled and tapped to accept the T-slot table.

Principe de fonctionnement

T-slotted tables allow the attachment of fixtures to test odd size specimens in the compression space of universal testing machines. 

Commercially available T-slot nuts are slid into the inverted T slot of the table. Bolts, studs, or threaded rods can then be threaded into the nuts. The T-slot table can be used to secure specimens that might otherwise be ejected from the test space under load. 

It can also be used to position specimens in the same location for repeated tests or batch testing of product. Guides, slides, or stops can be positioned on the table and bolted into position to allow precise placement of the specimens for every test. 

With the fixturing removed from the test space, the T-slotted table is capable of supporting a compressive load to full frame capacity, the same as the loading table.

Applications

  • Allow the attachment of fixtures to test odd size specimens in the compression space of universal testing machines (UTMs). 
  • Operate in static compression only
Article Accessory Height Compatible Frame Models Cat #
T-Slotted Table 44 mm 1.75 in 600DX 600DX-0005
T-Slotted Table - 150DX-0005 38 mm 1.5 in 150DX 150DX-0005
T-Slotted Table - 300DX-0005 38 mm 1.5 in 300DX 300DX-0005