Bending Pins (Set of 3) for Cold Bend Fixture - ASTM A706

W-6812-B2 | Bending Pins for Cold Bend Fixture

Bending Pins, set of 3, applicable to test specification ASTM A706

Pin Diameters included:

• 171.9 mm (6.768 in) for #9 Rebar
• 193.5 mm (7.620 in) for #10 Rebar
• 214.9 mm (8.460 in) for #11 Rebar

Note: Minimum test stroke required for 180 degree bends is 183 mm (7.2 in)