For Hydraulic Side-Action Grips

Jaw faces for the DuraSync range of hydraulic side-acting grips are available in a variety of surface options to accommodate a wide range of requirements ranging from standard flat and round metallic materials to special faces for stranded wire.

Principe de fonctionnement

Jaw faces are easily installed from the front side of the grips to allow a wide variety of materials and specimens to be tested. No routine maintenance is required beyond simple cleaning of the jaw face surfaces in contact with the specimen.

Applications

  • Tensile tests on a wide range of materials including: steel rod and plate, machined rounds and flats, reinforcement bar, 3- and 7-wire strand, conveyor belt, and wood products

Accessories

Accessories
Article Cat #
Insert Set for Cable size 11.1mm (0.4375 in.) W-5404-G
Insert Set for Cable size 12.7mm (0.50 in.) W-5404-H
Insert Set for Cable size 14.3mm (0.5625 in.) W-5404-J
Insert Set for Cable size 15.2mm (0.5938 in.) W-5404-K
Insert Set for Cable size 15.7mm (0.625 in.) W-5404-L
Insert Set for Cable size 19.1mm (0.75 in.) W-5404-M
Insert Set for Cable size 22.2mm (0.875 in.) W-5404-N
Insert Set for Cable size 25.4mm (1.00 in in.) W-5404-P
Insert Set for Cable size 4.8 mm (0.1875 in.) W-5404-A
Insert Set for Cable size 5.6mm (0.2188 in.) W-5404-B
Insert Set for Cable size 6.4mm (0.25 in.) W-5404-C
Insert Set for Cable size 7.1mm (0.2813 in.) W-5404-D
Insert Set for Cable size 7.9mm (0.3125 in.) W-5404-E
Insert Set for Cable size 9.5mm (0.375 in.) W-5404-F
Jaw Faces for Flats (Concentric Grooves, 1 mm pitch, 0 - 60 mm) W-5451-B
Jaw Faces for Flats (Concentric Grooves, 2 mm pitch, 0 - 60 mm) W-5451-C
Jaw faces for flats (Serrated- 20 TPI, 50 - 100 mm) W-5411-B
Jaw Faces for Flats (Serrated, 10 TPI, 0 - 60 mm) W-5461-A
Jaw Faces for Flats (Serrated, 20 TPI, 0 - 55 mm) W-5411-A
Jaw Faces for Flats (Serrated, 8 TPI, 60 - 120 mm) W-5461-B
Jaw faces for Flats (Tungsten Carbide Coating 0 - 60 mm) W-5451-A
Jaw Faces for Flats (V-Serrated 20 TPI, 10 - 35 mm) W-5412-B
Jaw Faces for Flats (V-Serrated. 10 TPI, 35 - 60 mm) W-5412-C
Jaw Faces for Flats (V-Serrated. 20 TPI, 3 - 10 mm) W-5412-A
Jaw Faces for Rounds (V-Serrated, 10 TPI; 35 - 60 mm) W-5452-C
Jaw Faces for Rounds (V-Serrated, 16 TPI; 10 - 35 mm) W-5452-B
Jaw Faces for Rounds (V-Serrated, 20 TPI; 3 - 10 mm) W-5452-A