Dynacell - Dynamic Load Cell ± 2000 N (± 450 lbf)
2527-129 | Dynacell, Dynamic Load Cell. ±2000 N (±450 lbf)
The fatigue life of the unit is 10E9 full stress reversed cycles at the capacity of the cell. Overload capability is 300% of the capacity before mechanical failure of the cell.
Dynacell is a unique load measurement device that automatically compensates for load errors induced through inertia of the load string components. A method
of dynamic inertia compensation is essential for all forms of dynamic testing.
Mechanical Interfaces:
Cell to Machine: 3 off M6 clearance holes on 57.15 PCD
Cell to Accessories: Central M6 x 1 right hand female thread
Overall Dimensions: 40mm high by 75mm diameter.
NOTE: When this Dynacell is mounted to an actuator piston, it is recommended that the maximum grip mass should be below 1000g for dynamic applications.
| Capacité | ±2 kN (±450 lbf ) |
|---|---|
| Diamètre | 75 mm (2.95 in ) |
| Hauteur | 40 mm (1.6 in ) |
| Fixation inférieure | M6x1RH Female |
| Static or Fatigue Rated | Fatigue |
| Upper Fitting | 3 x M6 and M6 RH |
| Masse | 1 kg (2.2 lb ) |
Dynacell
The 2527 Series load cells are designed for use with Dynamic Testing Systems; offering exceptional performance with the ability to measure forces as low as 1/250th of the force capacity to an accuracy of 0.5% of reading. Automatic transducer recognition and electrical calibration, makes them easy to use. The load cells can withstand loads up to 150% of their force capacity without damage and 300% without mechanical failure. All Instron load cells are individually temperature-compensated and tested for accuracy and repeatability on calibration apparatus that is traceable to international standards, with a measurement uncertainty that does not exceed one-third of the permissible error of the load cell.
- Produits
- 8/17/2018
- 0.6 MB