Notre site Internet utilise des cookies pour garantir que nous vous donnons la meilleure expérience d'utilisateur. En continuant de parcourir notre site, vous êtes d'accord avec l'utilisation de cookie. plus d'infos

fermer Close Cookie Notification
Instron
  • Back
  • Home
  • Produits
    SYSTÈMES D’ESSAI
    Systèmes d’essai universels
    Essai d’endurance de structures
    Machines d’essai robotisées
    Systèmes d’essais dynamiques et de fatigue
    Simulation de crash
    Bancs d’essai de torsion
    Rhéomètres et plastomètres
    Puits de chute et moutons pendules
    HDT & Vicat
    Plus en production
    ACCESSOIRES
    Logiciel
    Mâchoires de traction
    Pelage, friction, perforation
    Chambres de température et fours
    Capteurs de force
    Bancs de flexion
    Plateaux de compression
    Dispositifs pour essais pharmaceutiques et biomédicales
    Extensomètres
    Capteurs de force
    Outillages microélectroniques
    Mesure et préparation d’échantillon
    Tous les accessoires
    Catalogue d’accessoires
  • Solutions industrielles
    PAR MATÉRIAU PAR NORME PAR TYPE D’ESSAI
    PAR SECTEUR
    Aéronautique et spatial
    Automobile
    Biomédical
    Électronique
    MATÉRIAUX
    Matériaux composites
    Les métaux
    Plastiques
  • Services et assistance
    Instron Remote Technical Support CYCLE DE VIE DU PRODUIT
    FORMATION
    Bluehill
    Formation sur site dans votre établissement
    Apprentissage en ligne
    Bonnes Pratiques des Essais des Matériaux
    SERVICES
    Étalonnage et vérification
    Aide à la mise en œuvre
    Maintenance préventive
    Installation et déménagement
    Réparation et remise à neuf
    Mises à jour
    SUPPORT TECHNIQUE
    FAQ
    Services de mise à jour de logiciels
    RESSOURCES
    Manuels
    Localisateur de numéro de série
  • Notre société
    CARRIÈRES SALLE DE PRESSE ABONNEZ-VOUS À NOS LETTRES D’INFORMATION
    À PROPOS DE NOUS
    Notre histoire
    Nos implantations
    Accréditations et certificats
    RESSOURCES
    Glossaire
    Types d’essai
    Bibliothèque
    Lettres d’information
    Nouvelles
    Événements
    Séminaires en ligne
    Étude de cas
  • Nous contacter
  • France
Produits » Machines d'essai » Crash Simulation Systems » CSAadvanced

CSAadvanced

Menu
  • Crash Simulation Systems
    • CSAadvanced
    • HyperG
Contact Us
  • Description
  • Related Products
  • Software

Challenge

"Passive safety" means all measures which are necessary to protect vehicle occupants from injuries or to minimize the risk of injury. In addition to the low-deformation passenger compartment and the vehicle's deformation zones, restraint systems such as belt systems and airbags are among the essential protection systems within the passenger compartment. The development and optimization of these systems, taking into account the enormous variety of vehicle models, is a major challenge for automotive manufacturers and their suppliers. New legal requirements and more stringent consumer protection requirements (NCAP) lead to a constantly increasing number of necessary physical tests. In addition to modeling, the real test is required in the development phase for the verification and optimization of the components and structures. Crash simulation systems are also the most important development tools in the modern test lab of vehicle manufacturers or suppliers of restraint systems, seats and steering wheels to recreate real crash sequences or standardized crash pulses.

Solution

The Hydropuls® CSAadvanced was developed as a modular crash simulation system. This means that additional applications can be added to a basic system at any time. A wide range of applications and options are available. Requirements for the performance of a sled system are constantly increasing. Demands of up to 2000 test shots per year are no longer a rarity. In addition to very short times between two test shots, intelligent solutions for fast changing test setups are required to achieve this. With the solutions developed by Instron, the efficiency and productivity of the test labs are considerably increased. The high degree of automation as well as the possibility to run test pulses offline generate significant additional time savings. Existing pulses can be reproduced accurately for many years without the need to iterate the test system or signals. Finally the CSA advanced is characterized by a high availability due to minimal annual preventative maintenance requirements.
Instron has more than 50 years of applications experience with crash simulation and acceleration sled systems. Instron has sold more than 60 Hydropuls® CSAadvanced products worldwide and successfully put them into operation. 14 of these systems are additionally equipped with active controlled pitch motion simulation technology.

For the following applications, appropriate extensions can be retrofitted at any time:

  • "Low Speed Rear Impact" simulation
  • "Side and Pole Impact" simulation

With the following accessories the productivity and efficiency of the development process can be increased:

  • Frontal crash with pitch simulation
  • Quick clamping system for easy test-setup of pallets
  • New innovative sled design (2-Piece Sled)
  • Camera outriggers

Controller Labtronic® 8800ml

Labtronic 8800ml, Instrons new test controller, provides an integrated laboratory solution for all requirements from component tests through to simulation of service loads on full vehicles.

Hydropuls® actuators

Hydropuls hydraulic actuators are used in the full of static and dynamic applications where high precision simulation of movement, forces, strains and accelerations are required.

Servo valves

To deliver the full range of actuator performance requirements, a range of 2 and 3 stage servo valves with flow rates from 5 liters to 2400 liters/min are available.

Sensors

A comprehensive range of fatigue rated precision transducers are available to measure position, force, torque, pressure, strain and acceleration.

Power Packs and accessories

A modular range of variable flow hydraulic power supplies are available to service dedicated test systems or to be configured as a central laboratory supply facility. Pipeline solutions are also available to safely distribute the hydraulic supply around the lab.

CrashSim Office

The RS CrashSim simulation software is conceived for drive signal generation, visualization of the test sequence, and presentation of test results and display of the system status.

CrashSim

The system software CrashSim is used for the preparation, execution, monitoring, analysis and documentation of crash tests carried out on the Instron sled system.

Sélecteur géographique

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
INFORMATIONS DE CONTACT

3 boulevard Jean Moulin,
Omega Parc Bâtiment 2,
ELANCOURT, Cedex ,
78990, France

Ventes : +33 1 39 30 66 30

Services : +33 1 39 30 66 31

LIENS UTILES
  • Systèmes d’essai
  • Logiciel
  • Accessoires d’essai
  • Catalogue
  • Glossaire
  • Bibliothèque
  • Solutions d’essai
  • Lettres d’information
  • Séminaires en ligne
  • Étude de cas
  • Événements
  • Carrières
Policies / Legal
  • Politique de confidentialité et de témoins de connexion
  • Conditions générales
  • Contrôle à l’export
  • Avis de données RGPD
ENTREZ EN CONTACT AVEC NOUS
INSCRIVEZ-VOUS À NOTRE LETTRE D’INFORMATION
ADRESSE ÉLECTRONIQUE
© Illinois Tool Works Inc. Tous droits réservés.
[email protected]
  • Politique de confidentialité et de témoins de connexion
  • Conditions générales
  • Contrôle à l’export
  • Avis de données RGPD