3300 Series Universal Testing Systems up to 50 kN
The 3340 single column and 3360 dual column universal testing systems are designed to perform tensile, compression, flexure/bend, peel, tear, shear, and cyclic tests. These table model testing machines are available in force capacities that range from 0.02 N (2 gf) up to 50 kN.
Throughout 2020, the 3340 and 3360 Series systems will be replaced by the 3400 and 6800 Series table models (up to 50 kN) - Instron's next generation universal testing systems. Please contact your local sales engineer for availability in your region during this transition. Both the 3340 and 3360 Series systems are in Phase 1 of the Instron product life cycle, meaning these frames are still in full production and service support for hardware is available, as well as hardware and parts.
- 200:1 force range (i.e. use the load cell to 0.5% of capacity with no loss of accuracy)
- Load accuracy of 0.5% of indicated load
- 500Hz data acquisition rate
- Full software control (cyclic capability optional)
- Compatible with Bluehill® Software / Instron Connect
- Automatic transducer recognition for load cells and extensometers
- Thousands of optional grips and fixtures
- Optional temperature chambers
- Extra height and width options available
- Full CE compliance
The 3340 and 3360 Series frames remain compatible with our extensive selection of accessories, including grips, fixtures, load cells, extensometers, environmental chambers, and many other frame accessories.
| Specifications | ||||
|---|---|---|---|---|
| Model | Capacity | Minimum Speed | Maximum Speed | Vertical Test Space |
| Single Column Table Models | ||||
| 3342 | 0.5 kN | 0.05 mm/min | 1000 mm/min | 651 mm |
| 3343 | 1 kN | 0.05 mm/min | 1000 mm/min | 1067 mm |
| 3344 | 2 kN | 0.05 mm/min | 1000 mm/min | 1067 mm |
| 3345 | 5 kN | 0.05 mm/min | 1000 mm/min | 1123 mm |
| Dual Column Table Models | ||||
| 3365 | 5 kN | 0.01 mm/min | 1000 mm/min | 1193 mm |
| 3366 | 10 kN | 0.005 mm/min | 500 mm/min | 1193 mm |
| 3367 | 30 kN | 0.005 mm/min | 500 mm/min | 1193 mm |
| 3369 | 50 kN | 0.005 mm/min | 500 mm/min | 1193 mm |
Machine d'Essai de Traction Monocolonne Série 3340
La série de machine d'essai de traction monocolonne 3340 convient pour les essais de routine et de contrôle qualité pour de nombreux matériau. Ces machines d'essai bénéficient de toutes les avancées technologiques d'Instron à un prix très abordable
- Produits
- 6/6/2011
- 0.9 MB
3340 Single Column Table Frames System Support
The System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details.
- Manuel
- 5/3/2016
- 0.5 MB
3340 Single Column Table Frames Operator Guide
The Operators' Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
- Manuel
- 5/3/2016
- 500.9 KB
Machine d'Essai de Traction Bicolonnes Série 3360
La série de machine d'essai de traction bicolonnes de table 3360 convient pour les essais de routine et de contrôle qualité pour de nombreux matériau. Ces machines d'essai bénéficient de toutes les avancées technologiques d'Instron à un prix très abordable.
- Produits
- 6/6/2011
- 0.9 MB
3360 Dual Column Table Frames System Support
The System Support guide details the requirements, specifications, handling instructions, installation procedures, and maintenance details
- Manuel
- 5/3/2016
- 0.5 MB
3360 Dual Column Table Frames Operator Guide
The Operators' Guide provides the information you need to know to start testing after the system has been installed and set up for the first time. The document provides a detailed introduction, notes on prepping the system, and information on testing specimens.
- Manuel
- 5/3/2016
- 466.1 KB