Notre site Internet utilise des cookies pour garantir que nous vous donnons la meilleure expérience d'utilisateur. En continuant de parcourir notre site, vous êtes d'accord avec l'utilisation de cookie. plus d'infos

fermer Close Cookie Notification
Instron
  • Back
  • Home
  • Produits
    SYSTÈMES D’ESSAI
    Systèmes d’essai universels
    Essai d’endurance de structures
    Machines d’essai robotisées
    Systèmes d’essais dynamiques et de fatigue
    Simulation de crash
    Bancs d’essai de torsion
    Rhéomètres et plastomètres
    Puits de chute et moutons pendules
    HDT & Vicat
    Plus en production
    ACCESSOIRES
    Logiciel
    Mâchoires de traction
    Pelage, friction, perforation
    Chambres de température et fours
    Capteurs de force
    Bancs de flexion
    Plateaux de compression
    Dispositifs pour essais pharmaceutiques et biomédicales
    Extensomètres
    Capteurs de force
    Outillages microélectroniques
    Mesure et préparation d’échantillon
    Tous les accessoires
    Catalogue d’accessoires
  • Solutions industrielles
    PAR MATÉRIAU PAR NORME PAR TYPE D’ESSAI
    PAR SECTEUR
    Aéronautique et spatial
    Automobile
    Biomédical
    Électronique
    MATÉRIAUX
    Matériaux composites
    Les métaux
    Plastiques
  • Services et assistance
    Instron Remote Technical Support CYCLE DE VIE DU PRODUIT
    FORMATION
    Bluehill
    Formation sur site dans votre établissement
    Apprentissage en ligne
    Bonnes Pratiques des Essais des Matériaux
    SERVICES
    Étalonnage et vérification
    Aide à la mise en œuvre
    Maintenance préventive
    Installation et déménagement
    Réparation et remise à neuf
    Mises à jour
    SUPPORT TECHNIQUE
    FAQ
    Services de mise à jour de logiciels
    RESSOURCES
    Manuels
    Localisateur de numéro de série
  • Notre société
    CARRIÈRES SALLE DE PRESSE ABONNEZ-VOUS À NOS LETTRES D’INFORMATION
    À PROPOS DE NOUS
    Notre histoire
    Nos implantations
    Accréditations et certificats
    RESSOURCES
    Glossaire
    Types d’essai
    Bibliothèque
    Lettres d’information
    Nouvelles
    Événements
    Séminaires en ligne
    Étude de cas
  • Nous contacter
  • France
Solutions d'essais » Par Matériau » Métaux » Traction » Gripping Solutions for Tensile Testing

Gripping Solutions for Tensile Testing to ASTM E8, A370, A48, and GOST 1497-1

Norme

  • ASTM A48
  • GOST 1497
  • ASTM E1012
  • ASTM A370
  • ASTM E8

Domaine d'activité

  • Bâtiment/Construction
  • Enseignement
  • Aéronautique et fournisseurs
  • Produits manufacturés/grand public
  • Services de sous-traitance d'essais
  • Transports publics
  • Automobile/Rail/Construction navale

Type d’éprouvette

  • Button-head
  • Shoulder-end

Matériaux

  • Métaux

Types d'essais

  • Traction
Contactez-nousDemander un catalogue accessoires
300 kN Split Tensile Holders Testing .505 Button Head Specimens on 300LX
W-5158-A 300 kN Split Inserts
Split Insert Tensile Grip Diagram
W-5159 600 kN Holder and Insert
W-5158 300 kN Holders
  • 300 kN Split Tensile Holders Testing .505 Button Head Specimens on 300LX
  • W-5158-A 300 kN Split Inserts
  • Split Insert Tensile Grip Diagram
  • W-5159 600 kN Holder and Insert
  • W-5158 300 kN Holders
  • Description
  • Literature

Advancements in metals properties to improve performance characteristics have introduced materials to market that are stronger, tougher and many times more costly to produce. Tensile testing of these products can present a variety of gripping challenges. Use of a traditional grip arrangement consisting of a grip jaw or grip face will wear quickly and allow slippage. In addition, high production cost can mean limited material and shortened test samples. These are common challenges QC labs face and often lead to the need for machined, shoulder-end test specimens. Shoulder-end, or button-head test samples are outlined in ASTM E8, A370, A48, GOST 1497-1, as well as other general tensile test standards of metal products.

Challenge:

A high volume test lab performing tensile tests to ASTM E8/A370 using .505 inch shoulder-end specimens, is now required to also test .357, .252 and .161 inch shoulder-end specimens. Their test system configuration included the Model 300LX fitted with 300kN spherical alignment tension assembly and shoulder-end specimen holders, and a 2 inch gage length clip-on extensometer. They were experiencing difficulty with the existing holders and were concerned about the changeover time required for the holders and extensometers, as well as the expense that would be incurred to add the additional extensometers. Additionally, they were pursuing NADCAP accreditation and were concerned about the alignment of the load string.

Solution:

We recommended the newly improved Split Insert Tensile holders and (4) sets of interchangeable inserts to address the (4) separate specimen sizes. The new grips installed directly to the existing spherical tension alignment assembly, and improved per test time an average of 45 seconds due to the ease of use and interchangeability of the inserts. Instron Professional Services performed an alignment verification that was well within the specified limits as outlined in ASTM E1012 and NADCAP AC7101. The new specimen diameters and lengths also introduced the requirement for additional extensometers; Instron’s automated AutoX750 offered the ability to provide all of the gauge lengths in a single instrument.

Instron Split Insert Tensile Grips are the preferred solution for safe, high-volume production testing of shoulder-end or button-head machined specimens. Engineered with an operator focus, the split insert tensile grips are easy to install, offer quick change inserts for standard specimen sizes, and promote efficient testing of a wide range of metals and alloys.

Industrial Series LX Models

Featuring a large, single test space and single footprint, LX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.

  • Produits
  • 11/20/2017
  • 491.4 KB

Sélecteur géographique

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
INFORMATIONS DE CONTACT

3 boulevard Jean Moulin,
Omega Parc Bâtiment 2,
ELANCOURT, Cedex ,
78990, France

Ventes : +33 1 39 30 66 30

Maintenance : +33 1 39 30 66 31

LIENS UTILES
  • Systèmes d’essai
  • Logiciel
  • Accessoires d’essai
  • Catalogue
  • Glossaire
  • Bibliothèque
  • Solutions d’essai
  • Lettres d’information
  • Séminaires en ligne
  • Étude de cas
  • Événements
  • Carrières
Policies / Legal
  • Politique de confidentialité et de témoins de connexion
  • Conditions générales
  • Contrôle à l’export
  • Avis de données RGPD
ENTREZ EN CONTACT AVEC NOUS
INSCRIVEZ-VOUS À NOTRE LETTRE D’INFORMATION
ADRESSE ÉLECTRONIQUE
© Illinois Tool Works Inc. Tous droits réservés.
[email protected]
  • Politique de confidentialité et de témoins de connexion
  • Conditions générales
  • Contrôle à l’export
  • Avis de données RGPD